Pro-Line Boats Dual Console Series Owner's Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
To test the operations of the battery switch, place the switch in the off position
and try to start up the engine(s). When the switch is off, you should not be
able to start the engine(s).
Caution: To avoid possible alternator/battery damage on
twin-engine installations, make sure that the dual battery
switches are never left so both engines are connected
together, (i.e., never leave a switch on “BOTH” or “ALL”).
The preferred switch position is port engine to position one
(1) on the port battery switch and starboard engine to position
two (2) on the starboard battery switch.
Lighting Systems
Cabin Light – Head
The cabin light is installed in the ceiling of the head area. The dealer-installed battery provides power to this light.
To turn the light on and/or off, twist the top (base) of the light fixture to the left for on or to the right for off.
Cockpit Lights (Optional)
The cockpit lights are small circular lights located around the cockpit area near the
helm seat. Locate the 2-way cockpit light switch on the switch panel and press the
switch in the forward position to turn on the cockpit lights. Press the cockpit light
switch in the back or aft position to turn the lights off.
Navigation / Anchor Lights
The navigation and anchor lights are required to be used for operation at night or under low visibility conditions to
indicate your position to other boaters. Visually verify the operation of your navigation and anchor lights and
verify that the lights are free from obstructions. You should check your lights monthly during optimum visibility
conditions.
When you are underway in low visibility conditions, you should have the Nav/Anc switch in the up
or forward position. This will activate the navigation lights, as well as your anchor light.
When you are
anchored or in low visibility conditions, you should turn on the anchor light. Press
the Nav/Anc switch to the down or aft position to turn on the anchor light.
The navigation lights consist of a pair of lights that are mounted at the bow of the
boat. The red light is installed on the port side and the green light is installed on the
starboard side.
The U.S. Coast Guard requires that the anchor light be installed at the highest point
on the boat and must be secured in the up position when you are underway.
Therefore, this light will be installed as follows based upon the optional top that you
may have selected:
Arch – Light will be mounted on top of the arch
Bimini top or no top – Outlet for the removable light will be installed
on the forward edge of the motor well.
Instrumentation
Horn - Electric
The horn is used to signal, warn or alert other boats or persons on shore. The horn switch is located on the
switch panel. The horn device is located on the gunwale at the starboard side of the bow area. Depress the horn
switch to the up or forward position to activate the horn, then release the horn switch to deactivate the horn.
15
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

Comments to this Manuals

No comments